When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Overview
ISEEVY 4 channels video wall controller 2x2 is a professional video wall processor to distribute video signal to multiple TV monitors for splicing display. It supports HDMI-compatible DVI VGA USB inputs, you can switch to select display one of them at will.
With 4 HDMI-compatible outputs, it can support max 4 TVs splicing display.The input and output video resolution max support 1920*1080@60Hz, and the audio signal also will synchronize with output video.
You can control it easily via buttons, remote controller, or RS232 control Multiple Splice Modes
It supports 2x2, 1x2, 1x3, 1x4, 2x1, 3x1, 4x1 splice mode,but if want to display on vertical TVs, need to work with our "Video Rotating Box" to flip the video 90 or 270 degree.
(Note: the 1x3, 3x1, 1x4, 4x1 display effect is not good, the best resolution is using our "Magic Walll Processor")
2, Cascade Connection
It also supports multiple devices cascade connection, max 4x5 splice mode for 20 TVs
3, Mirror
It can rotate image 180 degree for each screen, the up row of TV rotated 180 degrees, thereby significantly reducing TVs splicing gap, reducing image distortion caused by the large seam.
4, Edge Mask
The image will appear pull-apart on visually and feel very unnatural if no enabled edge mask; Through the edge mask processing ,the image without deformation, stretching, more natural and realistic.
5, RS232 Software and Scrolling Subtitles
Connected PC with RS232 port, you can control it easier by the control software, and can enable and edit the scrolling subtitles
