When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Your browser does not support JavaScript.To view this page, enable JavaScript if it is disabled or upgrade your browser.
Click Here. Double your traffic. Get Vendio Gallery - Now FREE!
100V-240V Wall Mount Carbon Dioxide (CO2)
Temperatureand Humidity Indoor Air Quality Monitor
******
This CO2Sensor & Controller (wall-mount) is designed forfast and accurate measurement of CO2 level, humidity,air temperature, dew point temperature and wet bulb. Itmonitors CO2 concentration level and can controlsventilation system such as air conditioning to operate onlywhen its necessary without the need for occupant intervention.With CO2 Monitor & Controller you are ensuredwith a healthy workplace requiring minimum energy consumptionwhile simultaneously maintaining Indoor Air Quality (IAQ).
It can be set in 2 alarm limits:upper & lower limit. It has an audible & visualalarm to give warning when CO2 concentrationexceeds the limit. Once CO2 level goes back tonormal the alarm will automatically stop, but can be alsobe stop by pressing any key. It also has a built-in relay which can be connected to an Indoor AirQuality (IAQ) system to control the opening and closingof the system. In addition, it has PC Link that cansend gathered data directly to your PC for on-line loggingand data analysis via the optional RS-232 interface andsoftware (not included in set).
When the unit gets a high reading of CO2and there is no ventilation system attached, the user willbe notified via the beeping alarm and flashing LED lightand will automatically stop once CO2 concentrationgoes back to its normal level or a key has been pressed.
Poor indoor air quality in rooms can leadto fatigue, lack of concentration and illness (Sick BuildingSyndrome) due to high CO2 concentration.
Areas of Application:
- Hospitals
- Offices
- Schools
- Theaters
- Indoor Sports Arenas
- High Rise Buildings
- Indoor Area Quality
- Commercial Buildings
- Residential Housing
- Public Buildings
- Demand Controlled Ventilation
- Clean Rooms.
Stable Non-Dispersive Infrared (NDIR)Sensor for CO2 detection
Visible & Audible (80db) CO2warning alarm when CO2 concentration exceedsthe set limits
Alarm Output Relay for ventilation controlSimultaneous triple result, displayingCO2 level, temperature and humidity
ABC (automatic Baseline Calibration)and manual CO2 calibration
Factory pre-calibratedWith calibration indicator and can bemounted on the wall or a deskStatistics of weighted averages
- TWA (Time-Weighted Average) 8 HRS
- STEL (Short-term exposure limit)15 Minutes
PC Connect via optional RS232 Softwareinterface (not included in set)It has triple LCD Display and programmablealarms and built-in Non-Dispersive InfraRed (NDIR)
sensorthat provides long term stable monitoring
Built-in relay that controlsthe ventilation system to automatically maintain the CO2level that you set or specify
Higher accuracy than desktopCO2 Monitor models
Large Triple Function LCD Display withdigital readout
Long Time Drift Compensation
Selectable °C and °F
With Min/Max, Average Recall
Continuous monitoring
With CE Marking, passed the standardsand had been approved by European Directives for health& safety
With 100V-240V power inputand include power adaptor with UK / US/ EU / AU class=\"bullet1\">Range: 0~2000ppm
***** 2001~9999 (outof scale)
Accuracy: ±50ppm ±5%rdg(0~2000)
Resolution: 1ppm
Pressure Dependence: +1.6% readingper kPa deviation from normal pressure, class=\"bullet1\">Range: -10.0~60.0°C (14~140°F)
Resolution: 0.1°C/°F
Accuracy: ±0.6°C / class=\"bullet1\">Range: 0.0~99.9%
Resolution: 0.1%
Accuracy: ±3% (10~90%) **±5%(others)
Operating Condition: 0~50°C, 0~95%RHStorage Condition: -20~60°C, 0~99%RHWarm up: 30 seconds Power supply: 1A Output 12V AC AdaptorVoltage Input: - 1 x Wall-mountCO2 Monitor
- 1 x 12V Adaptor(available in US / UK / AU / EU plug)
- 1 x English Instruction manual
- Standardpackaging (not included in the set):
- RS232 CD software& cable
If you add US$24.00 or GBP15.50 or AU$26.00 (per set) to your order,then you will get a set of CD (Software) and USB Cable in extra
*