Kingston HyperX Beast 32GB Kit 240-pin DDR3 SDRAM khx24c11t3k4/32x For Sale

Kingston HyperX Beast 32GB 4x8GB Memory Kit 2400MHz DDR3 Non-ECC CL11 240-pin

Kingstons KHX24C11T3K4/32X is a kit of four 1G x 64-bit 8GB DDR3-2400 CL11 SDRAM Synchronous DRAM 2Rx8 memory modules, based on sixteen 512M x 8-bit DDR3 FBGA components per module. Each module kit supports Intel XMP Extreme Memory Profiles. Total kit capacity is 32GB. Each moduleis factorytested to run at DDR3-2400 at a low latency timing of 11-13-13 at 1.65V. TypeDDR3Memory Size32GBMemory PackageDIMMEnvironmentalOperating TemperatureOperating Temperature 0 to 85 °CElectricalVoltage1.5V - 1.65 VPhysicalBarcode740617213683Form FactorMemory KitProductFeatures

• JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 667MHz fCK for 1333Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 9, 8, 7, 6
• Posted CAS
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°
• Asynchronous Reset
• PCB : Height 1.827 inch (46.41mm) w/ heatsink, double sided component