SE3016 DAS 3U RAID Storage 16x 2TB Seagate ST32000444SS SAS Hard Drives SCSI For Sale

SE3016 DAS 3U RAID Storage 16x 2TB Seagate ST32000444SS SAS Hard Drives SCSI

click to Enlarge

click to Enlarge

Description:
You are offerding on a Complete SGI Rackable systems 3U Omnistor SE3016 SATA SAS Expander with Drives and RAID CARD

ALL Guaranteed under our 90 Day Warranty

It has 16 Bays for 3.5\" Hard Drives and it will come with 16x 2TB SAS Drives (drives are protected under out 90 Day Warranty)

this is a complete kit including the Storage, Drives and RAID controller, and all cables


it comes with:

* 3U Rackmount SGI Omnistor SE3016 16 Bay Case, and 16 Trays

ModelSGI Omnistor SE3016
Chassis Profile3U half-depth chassisChassis MountHalf-depth back-to-back for double density, or 2-post from center mountHost InterfacesTwo external 3Gb/s SAS 2x wide ports via two SFF-8088 mini-SAS interfaces (front cabled)Disk Drive OptionsUp to 16 hot-swappable 3.5\" or SAS, SATA or SSD drivesMax. CapacityUp to 32TB with 2TB disk drivesRAID SupportCompatible with server-based 3Gb/s SAS RAID and JBOD cardsPower SupplyAuto-switching 100-240 VAC or -48 VDCDimensions
(H x W x D)5.25\"(13.33cm) x 17\"(43.18cm) x 15.5\"(39.37cm)




*16x 2TB Seagate ST32000444SS SAS Hard Drives 3.5\" Form Factor

• Device Type Hard drive - Internal hard drive

• Capacity 2 TB

• Form Factor 3.5\" x 1/3H

• Interface Serial Attached SCSI 2

• Buffer Size 16 MB

• Width 4 in

• Depth 5.8 in

• Height 1 in

• Weight 1.6 lbs

Performance

• Drive Transfer Rate 600 MBps

• Internal Data Rate 150 MBps

• Seek Time 8.5 ms (average)

• Track-to-Track Seek Time 0.5 ms

• Spindle Speed 7200 rpm

Reliability

• MTBF 1,200,000 hour(s)

• Non-Recoverable Errors 1 per 10^15

• Start / Stop Cycles 300,000

Expansion & Connectivity

• Interfaces 2 x Serial Attached SCSI 2

• Compatible Bays 1 x Internal - 3.5\" x 1/3H

* LSI MegaRAID 8888-ELP PCI-Express x8 RAID Controller


MegaRAID SAS 8888ELP

• Users can choose two connectors: two internal, two external or one each.
• System builders can attach up to 240 SAS and/or SATA hard drives for greater system design flexibility.
• Brings peace of mind with its unique ability to address internal and external storage requirements.

Enlarge this

Solution Provided

Selectable eight-port SAS RAID solution for servers and workstations reguiring the flexibility to use either SAS or 3Gb/s SATA drives, or a combination of both in
internal or external storage environments

Environment

Internal and/or external sub-systems with up to 240 SAS or 3Gb/s SATA drives

Physical Dimensions

Low profile, extended half-length (8.250” X 2.535”)

Connectors

Two SAS SFF8088 x4 external connectors, two SAS SFF8087 x4 internal connectors

Device Support

Up to 240 devices supported

Host Bus Type

x8 lane PCI Express 1.0a compliant PCI Power Management Specification 1.1 compliant

Data Transfer Rates

Up to 3Gb/s per port

I/O Processor/SAS Controller

LSI SAS1078 RAID on Chip (ROC)

Cache Memory

256MB or 512MB DDR II SDRAM integrated

Battery Backup Unit

LSIiTBBU03, an optional Intelligent Transportable Battery Backup Unit (iTBBU)
LSIiBBU05, an intelligent battery backup module option with cable for remote cache protection

Key RAID Data Protection Features

• RAID levels 0, 1, 5, and 6

• Online Capacity Expansion (OCE)

• Configurable stripe size up to 1MB

• Check Consistency for background data integrity

• Hot Spare support
  – Automatic rebuild
  – Global and dedicated
  – Enclosure affinity
  – Emergency SATA hot spare for SAS arrays

• Enclosure management
  – SES (inband)
  – SGPIO (sideband)

• RAID spans 10, 50 and 60

• Online RAID Level Migration (RLM)

• Fast initialization for quick array setup

• Patrol read for media scanning and repairing

• 64 logical drive support

• DDF compliant Configuration on Disk (COD)

• S.M.A.R.T support

• Auto resume after loss of system power during
  arrays array rebuild or reconstruction (RLM)

• Up to 64TB LUN support

*Will Also come with 3M Branded 1 Meter Mini-SAS External Cable SFF8088 to SFF8088

1 Meter SFF-8088 to SFF-888 SAS Cable to connect from the RAID card onto the 2U SAS Expander

This is a Complete working unit with Drives

We offer a 90 Day warranty for all items.

Shipping:
* $50 within lower 48 States.
* $100 to Canada, Hawaii and Alaska.
* International please email for shipping quote first or check below of cost.
* Buyer is responsible for all custom fees and/or import taxes.
Payment:
* Paypal
* Visa, Mastercard, AMEX taken directly from seller
* Personal/Company check (Note: Personal/company check will be held 5 business days for clearance.)
* Santa Clara County sales tax will be applied if you are a California resident.Terms:* Payments must be received within 10 business days after our confirmation was sent to all winning buyer(s). Otherwise, the order is cancelled and the negative responses will be given as result.
* All shipping costs are non-refundable for any circumstances.
* Buyer pays all freight costs for returning the product(s).
* All returned items must be the same condition as shipped in order to receive a refunds. 20% restocking fee applies to customer errors.
* Buyer are responsible for all software or software related issues.
Returns (RMA):* If you have an issue with your item once it is received, please email through and we will try our best to help resolve the problem.
* If your item is in need of a replacement, repair, refund or exchange, please email through for instructions.
Contact:
* Phone: 877-864-9123 x122 ASK for Department have item number ready
* Business Hour: Monday - Friday 9:00am - 5:00pm PST

inkfrog terapeak
i000000