Search:


New DC-DC CC CV Buck Converter Step-down Power Module 7-32V to 0.8-28V 12A 300W For Sale


New DC-DC CC CV Buck Converter Step-down Power Module 7-32V to 0.8-28V 12A 300W
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

New DC-DC CC CV Buck Converter Step-down Power Module 7-32V to 0.8-28V 12A 300W :
$3.96

DC-DC CC CV Buck Converter Step-down Power Module 7-32V to 0.8-28V 12A 300W USADescription:the maximum current is 8-9A
(Spot: the maximum current is 8-9A, the input voltage is the highest 40V output voltage is about 35V or so)(Due to 12A current chip manufacturers to stop production, replace the chip current from the previous 12A down to 8A current (actual test maximum current in 9A or so), the input voltage from the previous 32V to 40V, the output voltage from the previous 28V to 35V. Power supply for 10 strings of high power LEDs 12A chips are subject to change.
QS-2405CCBD-12A power supply moduleSize: 65 (L) * 47 (W) * 23.5 (H) mmtypical application:Adjustable power supply (12A power is large enough), high power LED driver, LED display driver, lead battery charging, lithium battery charging, car power, car notebook power supply (buck), power supply, low voltage system power supply (such as children Toy car with 12V battery buck to 6V), 24V to 12V 12A \\ 12V to 5V 12A \\ 24V to 5V 12A \\ 24V to 19V20V and so on, the application range is very wide.1. Fixed turn lamp current is 0.1 times the constant current value (used when charging to identify whether the battery is full);2. Using a dedicated reference IC, and high-precision sampling resistor, so that constant current more stable, (20 degrees to 60 degrees constant current 5A when the temperature drift less than 5%). Especially for LED driver3. Output current, the maximum output current can reach 12A, to meet most of the needs.4.4 high-frequency capacitors, effectively reduce the output ripple, improve work stability5. Double heat sink design, MOS tube Schottky diode independent heat sink, heat is good, do not affect each other6. At the cost of large-size iron-silicon magnetic ring, improve work efficiency, and with pure copper and Rao, reduce heat, improve efficiency.7.3296 multi-turn potentiometer, voltage and current regulation of high precision, good stability.8. Special current sampling resistance Current sampling accuracy High stability and good temperature drift small. LED essential.9. Two-color indicator light, working status at a glance. Charging must be.10. Voltage and current are adjustable, so adjustable power supply effect, 12A current, power enough.Module parametersModular nature: non-isolated step-down constant current, constant voltage module (CC CV) charging moduleApplications: High-power LED constant current drive, lithium battery charging (including ferroelectric), 4V, 6V, 12V, 14V, 24V battery charging, nickel-cadmium nickel-metal hydride batteries (battery pack) charging, solar panels, wind turbinesInput voltage: 7-32V (without constant current 5-32V)Output voltage: (1) continuously adjustable (0.8-28V)(2) fixed output (0.8-28V between any choice), please tell the treasurer when buying. (For the time being only for bulk customers, all the sample adjustable type)(3) If you need higher voltage please contact me directlyOutput current: up to 12A (power tube temperature exceeds 65 degrees please add fan cooling, 24V to 12V 6A or less open environment generally can not fan)Constant current range: 0.2-12A (adjustable) (no constant current without this function)Turn current: constant current value * (0.1), turn the lamp current and constant current value linkage, such as the constant current value of 3A, turn the lamp current is set to constant current 0.1 times (0.1 * 3A = 0.3A), when the constant When the flow rate is adjusted to 2A, the turn lamp current is 0.1 times the constant current (0.1 * 2A = 0.2A).The secondary version is fixed for 0.1 times (the actual turn lamp current is probably not very accurate) is used to charge if the fill is full of instructions.Minimum pressure difference: 1VOutput power: maximum power of about 300W, power tube temperature over 65 degrees please add fan.Conversion efficiency: up to about 95% (the higher the output voltage, the higher the efficiency)Operating frequency: 300KHZOutput ripple: 20M bandwidth (for reference only)Input 24V output 12V 5A ripple 50mV or so (no noise)Operating temperature: industrial grade (-40 ℃ to +85 ℃) (the actual use, please pay attention to the power tube temperature, the temperature is too high, please strengthen the heat)No-load current: typical 20mA (24V to 12V)Load regulation: ± 1% (constant voltage)Voltage regulation: ± 1%Constant current accuracy and temperature: the actual test, the module temperature from 25 degrees to 60 degrees, constant current value of less than 5% (constant current value of 5A)Dynamic response speed: 5% 200uSPotentiometer adjustment direction: clockwise (increase), counterclockwise (reduced) close to the input potentiometer for voltage regulation (CV), close to the output of the potentiometer for the current regulation (CC)Indicator light: two-color indicator light, red light in charge, charging complete indicator green (no load is green) without constant current indicator light is red.Output short circuit protection: Yes, constant current (current set constant current value)Input Reverse Protection: None,Output to prevent backflow: none.Wiring method: terminal blockBattery charging method:1. Make sure you need to recharge the battery's float voltage and charge current, the module's input voltage;2. Adjust the constant voltage potentiometer, adjust the output voltage to about 5V.3. With the multimeter 10A current block measurement output short-circuit current, while adjusting the constant current potentiometer so that the output current reaches a predetermined charge current value;4. Adjust the constant voltage potentiometer so that the output voltage reaches the float voltage;5. Connect the battery, try charging.(1, 2, 3, 4 steps for the module input power supply, the output is not connected to the battery.)LED constant current drive use:1. Make sure you need to drive the LED's operating current and the maximum operating voltage;2. Adjust the constant voltage potentiometer, adjust the output voltage to about 5V.3. With the multimeter 10A current block measurement output short-circuit current, while adjusting the constant current potentiometer so that the output current to a predetermined LED operating current;4. Adjust the constant voltage potentiometer to make the output voltage to LED maximum operating voltage;5. Connect the LED, test machine.(1, 2, 3, 4 steps for the module input power supply, the output no load LED lights.) Package Included:

1 x DC-DC CC CV Buck Converter Step-down Power Module 7-32V to 0.8-28V 12A 300W USA


Payment Policy:
We ONLY accepted PayPal payment.shipping & time:
Generally, delivery time is10-20business days toUSA,United Kingdom,Australiaand15-30days to most other countries.Items will be shipped within 1 business day on payment received.Delivery time depends on destination and other factors, it may takes up to 30 business days.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Returns Policy:
All sales come with us 14-day warranty. Return items must not be used or have any sign of abuse or intentional damage. Buyer is responsible for all return shipping charges.We reserve the right not to refund S&H when the item has been posted.
Contact us:
If you have any questions,Please contact with us via message or our customer service e-mail.
You may expect to receive a response to your inquiry within 24 hours. (Excluding Weekends and Public Holidays)
response:
Dear buyers, we appreciate your business, if you are satisfied with our service, please leave us a positive response .
Please email us before leaving any 1 or 2 ratings, negative response or open any dispute.
We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues.
Please give us the opportunity to resolve any problem. thank you !
Buy Now

Other Related Items: