Search:


SMD DD1 CC1 Combo Pack Steve Meade Distortion Detector Crossover Calibrator For Sale


SMD DD1 CC1 Combo Pack Steve Meade Distortion Detector Crossover Calibrator

This item has been shown 13950 times.

Buy Now

SMD DD1 CC1 Combo Pack Steve Meade Distortion Detector Crossover Calibrator :
$290

THE PURPOSE AND BENEFIT OF THE D’AMORE ENGINEERING / SMD DISTORTION DETECTOR.

The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s output level, accurately and quickly. It can also be useful for detecting distortion in the audio signal caused by poorly designed or malfunctioning audio equipment.

WHAT IS INCLUDED?
  • The Distortion Detector (DD-1))
  • Protective silicon rubber boot
  • Calibrated Test tone CD
  • Harness
  • This manual
  • Pride of ownership
ABOUT THE DESIGN

When you pick up the DD-1, know that you are holding a precision piece of equipment. If treated as such it should provide you with many years of reliable service. We have chosen a9V batteryas a power source for a few reasons:

  • They are readily available
  • Isolating the DD1-1 from the vehicle’s electrical system forpower,guarantees that it will only measure what it is supposed to measure; the audio signal, notnoisein the charging system.

We also chose an RCA input connector for a few reasons:

  • It makes it pretty easy to measure the output of a headunit directly, if you choose to do so
  • Should the harness become damaged it is easily replaceable or repairable in the field
SPECIFICATIONS

Everyone hides these in the back of the book. We are proud of our specs, they aren’t lies, so we are putting them up front.

  • The Distortion Detector’s circuitry is 100% analog
  • Distortion Detection trigger level > 1.0% Harmonic Distortion
  • Guaranteed operating range of input signal is 1.2Vrms – 125Vrms. (15,000 Watts at 1 ohm) Autoranging
  • Signal Present LED trigger voltage 750mVrms
  • Low Battery LED trigger battery voltage < 5.6Vdc
  • Auto-shut off timer 8 - 10 minutes after ON button is pressed
THE PURPOSE AND BENEFIT OF THE D’AMORE ENGINEERING / SMD CROSSOVER CALIBRATOR.

Most moderncar audio amplifiershave a built in crossover on the side. Usually, it will start at 30hz and have a huge gap, all the way up to (sometimes) 500hz. The purpose of this tool is to enable the installer to set the crossover frequency of an electronic crossover to the desired frequency, accurately and quickly. Enter "Competition Mode" and easily match gains on any 4-channel amplifier or even multiple bass amplifiers. This is VERY important when using subwoofers that share a common chamber, especially if you have 2 (or more) amplifiers on a dual voice coil driver.

WHAT IS INCLUDED?
  • The Crossover Calibrator (CC-1)
  • Protective silicon rubber boot
  • Calibrated Test tone CD
  • Harness
  • This manual
  • Pride of ownership
ABOUT THE DESIGN

When you pick up the CC-1, know that you are holding a precision piece of equipment. If treated as such it should provide you with many years of reliable service. We have chosen a9V batteryas a power source for a few reasons:

  • They are readily available
  • Isolating the CC-1 from the vehicle’s electrical system forpower, guarantees that it will only measure what it is supposed to measure; the audio signal, notnoisein the charging system.

We also chose anRCA inputconnector for a few reasons:

  • It makes it pretty easy to measure the output of a headunit directly, if you choose to do so
  • Should the harness become damaged it is easily replaceable or repairable in the field
SPECIFICATIONS

Everyone hides these in the back of the book. We are proud of our specs, they aren’t lies, so we are putting them up front.

  • The Crossover Calibrator’s circuitry is digital microprocessor controlled
  • Crossover -3dB point accuracy +/- 0.25dB
  • Low Battery LED trigger battery voltage < 6.5Vdc
  • Auto-shut off timer 8 - 10 minutes after ON button is pressed

Buy Now

Other Related Items:



SMD DD1 Steve Meade Distortion Detector DD-1 Car Audio Amp Signal Test Tone CD
SMD DD1 Steve Meade Distortion Detector DD-1 Car Audio Amp Signal Test Tone CD


SMD DISTORTION DETECTOR DD-1
SMD DISTORTION DETECTOR DD-1


SMD DD1 CC1 Combo Pack Steve Meade Distortion Detector Crossover Calibrator
SMD DD1 CC1 Combo Pack Steve Meade Distortion Detector Crossover Calibrator


Pair ILL Customz Offset Power and Ground 1/0 Gauge to 4 Gauge Amp Input Reducers
Pair ILL Customz Offset Power and Ground 1/0 Gauge to 4 Gauge Amp Input Reducers


SMD DD1 Steve Meade Distortion Detector DD-1 Car Audio Amp Test Signal Tone
SMD DD1 Steve Meade Distortion Detector DD-1 Car Audio Amp Test Signal Tone


2 Stinger Pac Tweeter Capacitors Xovers Bass Blockers Car Audio Accessories New
2 Stinger Pac Tweeter Capacitors Xovers Bass Blockers Car Audio Accessories New


 NEW DEI 506T GLASS BREAK WINDOW AUDIO CAR ALARM SENSOR VIPER CLIFFORD PYTHON
NEW DEI 506T GLASS BREAK WINDOW AUDIO CAR ALARM SENSOR VIPER CLIFFORD PYTHON


Steve Meade SMD 4 Spot Quad ANL Fuse Holder Heavy Duty Distribution Block PVC
Steve Meade SMD 4 Spot Quad ANL Fuse Holder Heavy Duty Distribution Block PVC


NVX Tone Generator and Speaker Polarity Tester | XTGSP2
NVX Tone Generator and Speaker Polarity Tester | XTGSP2