When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
8MP 4-in-1 TVI/AHD/CVI/CVBS 5inch CCTV Security Camera Tester
Support CVBS + AHD(8MP)+ TVI (8MP) + CVI(8MP) Camera
** This CCTV Tester is NOT SUPPORT Digital Multimeter and NOT SUPPORT IP / NETWORK Camera. **
The new HD coaxial tester is developed for the on-site installation and maintenance of HD coaxial camera, having TVI, AHD,CVI. It also provides many useful functions, such as video display, PTZ control, DC12V output power, audio test, image generator, VGA video signal input, HDMI1.0 signal input, RS485 data searching, cable testing, LED lamp etc.
Functions:
Video monitor tester, High-resolution 5.0 inches 800 (RGB) x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality.
Video monitor tester built-in Pelco-D / P PTZ control protocol, etc. , through its own RS485 interface, the user can control the PTZ up, down, left, right rotation, and adjust one machine zoom, focus, aperture size.
Multi-format video OUT port image generator, sending a variety of standard (e.g. PAL, NTSC) color graphics section.
Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available.
Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.
- Enhanced Network Cable Testing
By UTP CABLE TEST port on the meter, you can test the connection of network cable.
Support VGA/HDMI 1.0 video input, once connect VGA/HDMIvideo, please switch selector to select HDMI or VGA mode. The maximum resolution is1920 x 1440.
HD TVI video surveillance testing, support1MP 2MP 3MP 4MP 5MP, 8MP. When TVI signal input, the tester will display HD TVI camera image.
HD video surveillance testing, support AHD 2.0 version,1MP 2MP 3MP 4MP 5MP, 8MP. When AHD signal input, the tester will display the AHD camera image.
HD CVIvideo surveillance testing, support1MP 2MP 3MP 4MP, 8MP. When CVI signal input, the tester will display HD CVI camera image.
It is useful for the engineer to install and maintain security system at night. LED On/Off pressing button, easy to operate.
- The Battery Graphic Display
The tester has advanced power control and protection circuit, low-power energy-saving, 4 to 5 hours on a single charge, can be used normally for 12 hours.
Package Included:
- HD coaxial tester
- 5VDC 1A Adapter (with USB cable)
- International Standard 18650 2600ma battery
- BNC cable
- RS485 connector
- Power output conversion cable
- Audio cable
- Lanyard
- Tool bag
- Instruction Manual